Technicial Specifications
| Maximum Rating | 330 kVA | 
| Minimum Rating | 230 kVA | 
| Emissions/Fuel Strategy | EU Stage IIIA | 
| Voltage | 200 to 400 Volts | 
| Frequency | 50 Hz | 
| Speed | 1500 rpm | 
| Duty Cycle | Standby, Prime | 
| Engine Model | C9 ATAAC, I-6, 4-Stroke Water-Cooled Diesel | 
| Bore | 112 mm | 
| Stroke | 149 mm | 
| Displacement | 8.8 l | 
| Compression Ratio | 16.1:1 | 
| Aspiration | Air to Air Aftercooled | 
| Fuel System | Hydraulic electronic unit injection | 
| Governor Type | Adem™A4 | 
| Length - Maximum | 3988 mm | 
| Width - Maximum | 1207 mm | 
| Height - Maximum | 1867 mm | 
Advantages and Features
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
 - Accepts 100% block load in one step and meets NFPA 110 loading requirements
 - Conform to ISO 8528-5 steady state and transient response requirements
 
R-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
 - Designed to match performance and output characteristics of Cat diesel engines
 - Robust Class H insulation
 
Cat Diesel Engine
- Reliable, rugged, durable design
 - Field-proven in thousands of applications worldwide
 - Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
 
GCCP1.3 Control Panel
- User-friendly interface and navigation
 - Scalable system to meet a wide range of installation requirement
 - Expansion modules and site-specific programming for specific customer requirements
 
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
 - Contact your Cat Dealer for specific ambient and altitude capabilities
 
Generator Features
- Matched to the performance and output characteristics of Cat engines
 - Industry leading mechanical and electrical design
 - Industry leading motor starting capabilities
 - High Efficiency
 
Certifications
The generator set meets transient response and block loading steps as per ISO 8528-5.One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
 - The generator set is fully assembled at a Caterpillar facility following our quality guidelines
 - Each generator set package is tested before leaving the Caterpillar facility
 - Cat product support, including dealer service, parts and warranty covers the entire Cat power system
 
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
 - Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
 
Standard Equipment
- 
                        Air Inlet System
                        
                        
- Air cleaner, light duty with disposable paper filter
 
 
- 
                        Control Panels
                        
                        
- GCCP 1.3
 
 
- 
                        Cooling System
                        
                        
                        
- Fan drive, battery charging alternator drive
 
- Radiator and cooling fan with guard
 
- Caterpillar extended life coolant
 
- Coolant drain line with valve
 
 
- 
                        Exhaust System
                        
                        
- Stainless steel exhaust flex, gaskets, rain cap & SAE exhaust flange for customer use - shipped loose
 
 
- 
                        Fuel System
                        
                        
                        
- Base, formed steel with single wall integral 8-hour fuel tank
 
- Standard open set fuel tank/base supplied
 
 
- 
                        Generators and Generator Attachments
                        
                        
                        
- 12 Leads
 
- Mandatory option circuit breaker, IEC, 3 pole mounted in power centre
 
- Voltage regulator (single phase sensing)
 
- Segregated low voltage (AC/DC) wiring panel
 
- IP23 Protection
 
- Power centre, IP22
 
 
- 
                        Governing System
                        
                        
- Cat electronic governor (ADEM A4)
 
 
- 
                        Lube System
                        
                        
                        
- Oil drain valves
 
- Lubricating oil
 
- Oil cooler
 
 
- 
                        Mounting System
                        
                        
                        
- Includes lifting provisions and termination points for coolant and lube oil drain lines
 
- Captive linear vibration isolators between base and engine-generator
 
 
- 
                        Starting / Charging System
                        
                        
- 24V battery with rack and cables
 
 
- 
                        General
                        
                        
- Engine and alternator re-paint, Caterpillar yellow
 
 
Optional Equipment
- 
                        Certifications
                        
                        
                        
- European Certificate for Conformance
 
- Global Certification for CIS
 
 
- 
                        Air inlet system
                        
                        
- Single element air cleaner
 
 
- 
                        Circuit breakers
                        
                        
- 4 Pole (IEC-100% rated) Circuit breaker upgrades: 400, 630, 800 and 100 amps
 
 
- 
                        Control Panels
                        
                        
                        
- Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; overload shutdown via breaker ; Low fuel level shutdown ; Low fuel level alarm ; Fuel level sensor
 
- Control panel Options: Volt free contacts ; Local alarm horn ; Oil temperature displays
 
 
- 
                        Cooling System
                        
                        
                        
- Radiator duct flange
 
- Low coolant temperature alarm
 
 
- 
                        Enclosures
                        
                        
                        
- Sound attenuated enclosure
 
- High ambient sound attenuated enclosure
 
 
- 
                        Exhaust System
                        
                        
                        
- 5 and 6 inch elbow kits
 
- 5 - 6 inch flange adaptor
 
- Mufflers - End in/end out; 10 dBA or 25 dBA attenuation
 
- 6 inch flange
 
 
- 
                        Fuel System
                        
                        
- Integral dual wall fuel tank base
 
 
- 
                        Generators and Attachments
                        
                        
                        
- Permanent magnet excitation (PMG) generator
 
- Oversize, AREP, CIP generators
 
 
- 
                        Mounting System
                        
                        
- Narrow skid base
 
 
- 
                        Starting / Charging System
                        
                        
                        
- Jacket water heater
 
- 5 Amp single Battery charger
 
- Battery disconnet switch