Technicial Specifications
| Maximum Rating | 220 kVA | 
| Minimum Rating | 135 kVA | 
| Emissions/Fuel Strategy | Non Regulated, EU Stage IIIA | 
| Voltage | 110 to 480 Volts | 
| Frequency | 50 Hz | 
| Speed | 1500 rpm | 
| Duty Cycle | Standby, Prime | 
| Engine Model | Cat® C7.1 | 
| Bore | 105 mm | 
| Stroke | 135 mm | 
| Displacement | 7 l | 
| Compression Ratio | 16.0:1, 18.2:1 | 
| Aspiration | Turbocharged, Air to Air Aftercooled | 
| Fuel System | Direct Injection | 
| Governor Type | Mechanical | 
| Length - Maximum | 2500 mm | 
| Width - Maximum | 1320 mm | 
| Height - Maximum | 1626 mm | 
Advantages and Features
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
 - Accepts 100% block load in one step and meets NFPA 110 loading requirements
 - Conform to ISO 8528-5 steady state and transient response requirements
 
Cat Diesel Engine
- Reliable, rugged, durable design
 - Field-proven in thousands of applications worldwide
 - Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
 
M-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
 - Designed to match performance and output characteristics of Cat diesel engines
 - Robust Class H insulation
 
GCCP 1.3 Control Panel
- User-friendly interface and navigation
 - Scalable system to meet a wide range of installation requirement
 - Expansion modules and site-specific programming for specific customer requirements
 - Image may not be a representative of actual product
 
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
 - Contact your Cat Dealer for specific ambient and altitude capabilities
 
Certifications
Fully prototype tested with certified torsional vibration analysis availableOne Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
 - The generator set is fully assembled at a Caterpillar facility following our quality guidelines
 - Each generator set package is tested before leaving the Caterpillar facility
 - Cat product support, including dealer service, parts and warranty covers the entire Cat power system
 
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
 - Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
 
Standard Equipment
- 
                        Air Inlet System
                        
                        
- Air cleaner; light duty with disposable element
 
 
- 
                        Control Panels
                        
                        
- EMCP 4.1
 
 
- 
                        Cooling System
                        
                        
                        
- Radiator and cooling fan with guards
 
- Fan drive, battery charging alternator drive
 
- Coolant drain line with valves
 
- Caterpillar extended life coolant
 
 
- 
                        Fuel System
                        
                        
                        
- Base, formed steel with single wall integral 8-hour fuel tank
 
- Standard open set fuel tank/base supplied
 
 
- 
                        Exhaust System
                        
                        
- Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose
 
 
- 
                        Generator and Generator Attachments
                        
                        
                        
- Segregated low voltage (AC/DC) wiring panel
 
- Voltage regulator (single phase sensing)
 
- Tower panel, IP22, bottom cable entry
 
- 12 Leads
 
 
- 
                        Governing System
                        
                        
- Mechanical and electrical governing system - model dependent
 
 
- 
                        Lube System
                        
                        
                        
- Oil drain line with valve
 
- Lubricating oil
 
 
- 
                        Generators and Generator Attachments
                        
                        
                        
- IP23 Protection
 
- Circuit breaker, IEC, 3 pole, mounted in tower panel
 
 
- 
                        Mounting System
                        
                        
                        
- Includes lifting provision and drag points
 
- Captive linear vibration isolators between base and engine-generator
 
- Captive linear vibration isolators between base and engine-generator
 
- Termination points for coolant and lube oil drain lines
 
 
- 
                        Starting / Charging System
                        
                        
- 24V battery with rack and cables
 
 
- 
                        General
                        
                        
- Engine and alternator pre-paint, Caterpillar yellow
 
 
Optional Equipment
- 
                        Alternator System
                        
                        
                        
- 3 Phase sensing
 
- Optional LC Frame alternator
 
- Optional LC Frame alternator with coastal insulation protection
 
- R Frame auxiliary winding: R2273L4 SE aux alt 07, aux alt 08 and aux alt 10
 
- Permanent magnet excitation (PMG)
 
- Quatrature droop king
 
- Alternator removal
 
- Anti-condensation heater
 
 
- 
                        Circuit breakers
                        
                        
                        
- 4 Pole 250A, 400A and 630A Circuit breakers
 
- Padlockable breaker device
 
 
- 
                        Control System
                        
                        
                        
- 1000001235
 
- Static battery charger
 
- Control panel heater
 
- Volt free contacts for common alarm
 
- Volt free contacts for generator set running
 
 
- 
                        Control Panel Options
                        
                        
- Overload shutdown via breaker
 
 
- 
                        Cooling System
                        
                        
                        
- Low coolant level shutdown
 
- Coolant heater
 
- Low coolant temperature
 
 
- 
                        Enclosures
                        
                        
                        
- Rental options (CAE only) - Single point lift
 
- Rental options (CAE only) - Rental pack
 
- Rental options (CAE only) - CEE form sockets for enclosure
 
- Sound attenuated level 2 enclosure
 
- Sound attenuated level 1 enclosure
 
- Rental options (CAE only) - Socket blanking plate
 
 
- 
                        European Certifications
                        
                        
- Upgrade to STD set for CE
 
 
- 
                        Fuel Systems
                        
                        
                        
- Skidbase for CALG enclosure sets
 
- Open set narrow tankbase
 
- Low fuel level alarm
 
- DEFRA bunded fuel tank
 
- Low fuel level shutdown
 
- High fuel level alarm
 
- Compact skidbase for open sets
 
 
- 
                        Global Certifications
                        
                        
- Certification for CIS
 
 
- 
                        Mounting Options
                        
                        
                        
- Electronic governor
 
- Industrial silencer removal
 
- Residential silencer
 
- Battery removal
 
- Silencer installation kit
 
 
- 
                        Test Reports
                        
                        
                        
- PGS Test report @ 1.0 power factor
 
- PGS Test report @ 0.8 power factor
 
 
- 
                        General
                        
                        
- Stone guards/radiator trans flange
 
 
- 
                        Power Termination
                        
                        
- Circuit breaker, IEC, 4 pole
 
 
- 
                        Accessories / Miscellaneous
                        
                        
                        
- Packing case - compact set
 
- Packing case - canopied set