Leasing calculator - will allow you to calculate the cost of your monthly payment. Leasing Calculator
Parts online
 
 
 
 
 

MD6310

MD6310

The Cat® MD6310 is a powerful, flexible rotary blasthole drill that offers a wide variety of features and options designed to meet your site’s specific needs and challenges. A world-class cab helps keep operators safe and comfortable while increasing performance. And it’s infused with the latest technologies that increase productivity and allow for autonomous drilling—improving the efficiency of all downstream operations. ​Designed to drill holes from 229-311 mm (9-12.25 in) in diameter, the MD6310 is is optimized for single-pass or multi-pass drilling in both rotary and down-the-hole drilling modes.

Pull-Down Capacity Up to 39 009 kg (86,000 lb)
Hole Diameter 229-311 mm (9-12.25 in)
Engine Cat® C32B

Technicial Specifications

Pull-Down/Hoisting Capacity
Pull-Down Capacity Up to 39 009 kg (86,000 lb)
Specifications
Hole Diameter 229-311 mm (9-12.25 in)
Engine Cat® C32B
Bit Load Up to 42 149 kg (Up to 92,922 lb)
Dimensions (Approximate) - 17.5 m (57.4 ft) Mast
Body Length - Standard Cab 13.27 m
Length - Mast Down - Extended Cab 25.43 m
Length - Mast Down - Standard Cab 24.9 m
Width - Front 5.39 m
Body Length - Extended Cab 13.79 m
Height - Mast Up 23.77 m
Width - Rear 6.32 m
Basic Specs
13.7 m (44.9 ft) Mast - Hoist Speed 37.4 m/min
17.5 m (57.4 ft) Mast - Hoist Speed 37.4 m/min
Emissions (Equivalent to Tier 2): Engine C32B @ 1,800 rpm
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth Down to 74.6 m (Down to 244.9 ft)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth Down to 47.9 m (Down to 157.4 ft)
17.5 m (57.4 ft) Mast - Pulldown Capacity Up to 39 009 kg (Up to 86,000 lb)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth 17.5 m
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in)
Angle Drilling Vertical to 30° (in 5° increments)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in)
17.5 m (57.4 ft) Mast - Bit Load - Single Pass Up to 42 149 kg (Up to 92,922 lb)
13.7 m (44.9 ft) Mast - Hoist Capacity Up to 22 113 kg (Up to 48,750 lb)
Compressor - Rotary Drilling (1) 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
Compressor - Rotary Drilling (2) 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
13.7 m (44.9 ft) Mast - Pulldown Capacity Up to 39 009 kg (Up to 86,000 lb)
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth 13.7 m
Emissions (U.S. EPA Tier 4 Final): Engine C32B @ 1,800 rpm
Compressor - DTH Drilling 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
17.5 m (57.4 ft) Mast - Hoist Capacity Up to 22 113 kg (Up to 48,750 lb)
13.7 m (44.9 ft) Mast - Bit Load - Single Pass Up to 41 165 kg (Up to 90,753 lb)
Emissions (U.S. EPA Tier 4 Final): Power Rating ISO 14396 751 kW
Emissions (Equivalent to Tier 2): Power Rating ISO 14396 769 kW
Undercarriage
Drawbar Pull 547000 N
Track chain guards and guides Level two
Travel Speed 2.45 km/h
Lower rollers Fourteen (14)
Model Cat® 349E EL Excavator type
Carrier Rollers Three (3)
Triple grousers for soft rock ground bearing pressure 1.28 bar (18.5 psi) 750 mm
Safety and Security
Components (10) In-deck mounted battery box
Components (9) Self-closing, gates secure egress ladder locations
Components (12) Air hose retention devices
Components (2) Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left
Components (6) Guards for exhaust pipes and turbo lines
Feature Approach angle of 14 degrees facilitates loading and unloading on a lowboy
Components (7) Mast access ladder with mast grating (option)
Components (4) Tram alarm is automatic and audible
Components (11) Ground level keyed battery disconnect/starter lockout with remote jump start terminals
Components (1) Alloy drill deck covers, with storage provision
Components (5) Hinged protective guard for full front drill window
Components (3) Electric horn activated by push button in the cab
Components (8) Three egress points on deck areas in addition to main access
Operating System Controls - Standard
Components (10) Filter indicators for hydraulic, compressor and engine
Components (14) ECM controlled proportional fan speed control system
Components (23) Data logging of machine health with warnings, and fault code records; export capability
Components (20) Cabin pressure manometer with indicator (option)
Components (3) Rotation torque control
Components (12) Dust suppression control
Components (17) Tram interlock, mast up and locked or down and parked
Components (1) All electric controls for drilling, tramming, leveling plus auxiliary functions
Components (22) Prewired for Terrain and autonomous operation
Components (8) Delayed engine shut down
Components (19) Cab environment controls (AC, filter, heat, fan speeds)
Components (7) Drill performance and display system
Components (13) Mast lock indicator
Components (6) Drill depth meter
Components (2) Electronic compressor control
Components (4) Virtual rotary head travel stops and interlocks
Components (11) Jack pressure sensors in the display
Components (5) Pipe positioner engaged/disengaged indicator
Components (18) Tram interlock, jacks retracted
Components (16) Tram interlock, pipe in hole
Components (21) Dust curtain lifting system – auto hydraulic raise front and rear (option)
Components (15) Tram interlock, machine stability limits
Components (9) Rotary head rpm gauge – (digital display in screen)
Dimensions (Approximate) - 13.7 m (44.9 ft) Mast
Body Length - Standard Cab 13.27 m
Body Length - Extended Cab 13.79 m
Width - Rear 6.32 m
Length - Mast Down - Standard Cab 21.1 m
Length - Mast Down - Extended Cab 21.62 m
Height - Mast Up 19.93 m
Width - Front 5.39 m
Mast
Note (2) Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling
Features (12) Pipe catcher; manual or optional hydraulically actuated
Features (4) Feed system accommodates multiple pipe diameters
Note (1) Hydraulic, indexing pipe carousels accept various pipe diameters
Features (13) Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only)
Features (2) Pulldown/hoist system is a single cylinder
Features (1) 13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel
Features (9) Drill pipe positioner
Features (10) Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option)
Features (3) Auto tensioning of pull down and hoist cables
Features (6) Sliding deck wrench assembly
Features (11) Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb)
Features (15) Mast access ladder and grating (option)
Features (5) Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters
Features (7) Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH
Features (14) Mast lanyard mounting provisions (option)
Features (8) Angle drilling 0-30°; in 5° increments
Engine Choices
Components (4) Ether starting aid; ether bottle supplied locally
Components (2) Scheduled oil sampling (S∙O∙SSM) ports
Components (1) Dual starter motors
Components (3) Common air intake filters provide +500 hour service interval in normal operating conditions
Service Packages
Package (1) Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water
Package (2) Standard – Fast Fill for fuel and water; Automatic Lubrication System
Package (3) Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose
Dust Suppression Choices
Water injection and dry dust collector (option) – Water tank capacity 1514 L (400 gal)<br>– 204 m³/min (7,200 cfm) dry dust collector<br>– Self-cleaning filters, with auto-eject dust chute
Water Injection - Standard – Water tank capacity 1514 L (400 gal)
Choices (1) Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector)
Choices (3) Static dust curtains, four sides boxed in (standard)
High Volume Water Injection System - Not Compatible with Basic Service Package – Water tanks total capacity 3785 L (1,000 gal) maximum<br>– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)<br>– Secondary tank above deck – 2271 L (600 gal) capacity deck
Choices (2) Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications)
Tool Package Rotary
Components (4) Top Sub, or Shock sub and cross over adapter (option)
Components (3) Deck wrench, sliding
Components (5) Bit sub
Components (1) Roller deck bushing
Components (6) Pipe wiper seal
Components (2) Pipe positioner inserts
Compressor/Receiver Choices
Rotary Drilling (2) 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
Receiver Tank Choice (1) Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE
Rotary Drilling (1) 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
DTH Drilling - Includes Tool Lubrication and Hammer Storage 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
Note With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption<br>– Both high and low pressure compressors contain this feature
Receiver Tank Choice (2) High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE
Choice Electronic compressor control and regulation with purged air lines
Frame and Work Deck
Components (5) Four (4) lift lugs, for use with cables or chains
Components (7) Bit storage box in-deck with hinged cover (option)
Components (6) Walkway around cab to drill deck (option)
Features (2) Slip resistant surface
Features (3) Fuel tank capacity 1609 L (425 gal)
Components (1) Stationary rear deck; for vertical and angle drilling
Components (2) Four leveling jacks to provide leveling on a 7° bench (any orientation)
Features (6) Three egress points on deck areas in addition to main access
Components (10) Drill pipe thread greaser with remote fill tank or disposable grease bucket (option)
Features (7) Sturdy guardrails, toe guards, self closing gates
Components (4) Heavy duty tow hooks (front end)
Components (3) Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option)
Components (8) DTH hammer storage on drill deck with high pressure configuration (option)
Features (4) Fuel capacity expansion for additional +1609 L (425 gal)
Features (5) Bolt-on platform for cold weather generator or fire suppression bottles (option)
Components (9) Hydraulically operated viewing hatch in drill deck with spotlight (option)
Features (1) Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Cooling
Components (2) Separate engine cooling module
Components (1) Coolers with easy cleaning access
Components (3) Replaceable cooler core sections
Components (4) Automatic variable speed fan control
Features Functional in ambient temperature of 52° C (125° F)
Automation and Technology
Components (6) Wiring for third party interface
Components (3) Drill assist (single or multipass auto drill) (options)
Components (5) Optional Command for Drilling enables each operator to manage more than one machine
Type Autonomy ready
Components (2) Auto level, auto retract, auto mast
Components (1) Drill depth indicator and interlocks
Optional Cat Terrain for Drills - Mining System Interface – Production<br>– Navigation
Components (4) Product Link Elite (hardware from factory, subscription package via dealer)
Drill Pipe
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (1) 203 mm
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: DTH 178 mm
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary or DTH 194 mm
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (2) 219 mm
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary 235 mm
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (2) 219 mm
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (1) 203 mm
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: DTH 178 mm
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary or DTH 194 mm
Note Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)<ul><li>Dual purpose pipe carousel accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters</li></ul>
Climate Choices
Climate Level 2 Arctic Fluids and Lubricants Rated down to –18° C (–0.4° F) temperatures
Climate Level 1 Standard Fluids and Lubricants (1) Rated down to –1° C (30° F) temperatures
Climate Level 1 Standard Fluids and Lubricants (2) Withstands high heat to 52° C (125° F)
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (6) Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (3) Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (1) Rated down to –40° C (–40° F) temperatures
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (5) Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (2) Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (4) Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plus tank
Overhead Winch System (optional)
Cable Diameter 13 mm
Winch Reach - Past The Drill Deck 6.1 m
Capacity Rating 1814 kg
Note Variable speed control
Operator Environment
Lighting – LED interior lights; separate reading light, and backlit joysticks and keypads<br>– Zone controls for area lights and spot lighting for night drilling<br>– Flood lights for the drill perimeter<br>– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways<br>– Standard lighting is Halogen, 1,300 lumens flood light on perimeter, area spot lights have 1,950 lumens<br>– Premium lighting is LED, 4,200 lumens flood light on perimeter (option)<br>– Mast clearance lights, cab mounted strobe, front mounted tram beacon (option)
Components (7) Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port
Components (4) Drill performance touchscreen display
Components (3) Cab perimeter walkway available for both cab sizes
Components (1) Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station
Components (13) Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
Components (9) Power convertor 24V to 12V
Components (2) Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave
HVAC – Floor vents in the foot rest area<br>– Roof-mounted air conditioner/heating/pressurizing unit<br>– Filter access from deck, does not require roof access, and has approximately 500 hour service interval<br>– Defogging HVAC vents on driller window
Components (6) Two swing-out hinged doors with windows and Cat keyed locks
Components (14) Trainer’s seat that folds away and has retractable seat belt (optional)
Cameras – Mounted on the front and left sides to provide 360° view from operator's seat<br>– Camera on the mast to view pipe carousel/top drive operation
Components (5) Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise
Components (10) Radio-ready for communication and entertainment radio
Cab - Premium – Leather seat with heat and ventilation<br>– Dual pane window glass<br>– Front window guard<br>– Additional in-cab storage box<br>– Additional windshield wipers on front and rear windows<br>– Window shades (option)<br>– Foldaway trainer’s seat (option)<br>– Removable floor mat
Components (11) Cab roof access ladder (option)
Cab - Standard – Fabric seat<br>– Single pane window glass<br>– Windshield wiper for driller window<br>– Window shades (option)<br>– Foldaway trainer’s seat (option)<br>– Removable floor mat
Components (8) Additional display screen for cc cameras; color, high-definition 254 mm (10 in)
Components (12) Literature holder
Rotary Head Top Drive System
Components (4) Virtual rotary head travel stops and interlocks
Components (3) Rotary torque control
Components (2) Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque
Components (1) Spindle with 168 mm (6.625 in) API regular thread and splined collar
Hydraulics
Components (2) One (1) auxiliary circuit pump – 110 cc (piston, load sensing)
Components (3) Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls)
Components (1) Two (2) primary pumps – 210 cc (piston, with proportional electronic controls)
Components (4) Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement)
Components (5) Scheduled Oil Sampling (S∙O∙S) ports
Tool Package DTH
Components (1) Two piece bushing
Components (6) Pipe wiper seal
Components (4) Shock sub and top sub adapter
Components (5) Cross over hammer adapter
Components (3) Deck wrench, sliding
Components (2) Pipe positioner inserts
Frame Access Choices
Choice (1) Fixed access ladder to the cab area
Choice (2) Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down
Choice (3) Cab perimeter walkway available with either choice
Mast Packages
Mast Accessories Hydraulic (2) One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket
Mast Accessories Hydraulic (1) One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket
Angle Drilling Included with either mast
Mast Accessories Manual, 17.5 m (57.4 ft) Mast Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket
Mast Accessories Manual, 13.7 m (44.9 ft) Mast One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket
Carousel (Mast size and pipe diameter dependent)
13.7 m (44.9 ft) Mast Carousel; holds quantity of 4 × 12.19 m (40 ft) pipes; total depth 62.5 m (204.9 ft): Pipe diameters 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
13.7 m (44.9 ft) Mast Carousel; holds quantity of 5 × 12.19 m (40 ft) pipes; total depth 74.6 m (244.9 ft): Pipe diameters 194 mm (7.625 in), 219 mm (8.625 in)
17.5 m (57.4 ft) Mast Carousel; holds quantity of 2 × 7.62 m (25 ft) pipes; total depth 32.7 m (107.4 ft): Pipe diameter 235 mm
17.5 m (57.4 ft) Mast Carousel; holds quantity of 4 × 7.62 m (25 ft) pipes; total depth 48 m (157.5 ft): Pipe diameters 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
Note 13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)<ul><li>Accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters</li></ul>
Service Tool Options
Option Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter
Lifting Bails (Available on Request) – 114 mm (4.5 in) API reg thread<br>– 140 mm (5.5 in) API reg thread<br>– 168 mm (6.625 in) for top sub/shock sub API thread<br>– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread<br>– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread
Weights - 13.7 m (44.9 ft) Mast
Working Weight Range - Minimum/Maximum 75 800/97 000 kg (167,110/213,848 lb)
Hydraulic Break Out Wrench
Variable Grip Hydraulic Break Out Wrench Grip Ranges (2) 235 mm (9.25 in)
Variable Grip Hydraulic Break Out Wrench Grip Ranges (1) 178-219 mm (7.0-8.625 in)
Weights - 17.5 m (57.4 ft) Mast
Working Weight Range - Minimum/Maximum 75 500/97 500 kg (166,449/214,950 lb)

Advantages and Features

WORLD-CLASS OPERATOR STATION

  • Ergonomic controls to help operators stay alert and avoid fatigue
  • Multifunction joystick controls and touchscreen monitors are easy to use and intuitive
  • Excellent visibility, thanks to multiple cameras and full-length windows
  • Optional heated and ventilated seat for enhanced operator comfort

100% CAT INTEGRATION

  • Cat to the core, with common parts and components and consistent design characteristics across all Cat drill models
  • Shared software for autonomous features
  • Backed by the world-class support of the Cat dealer network

CAT ELECTRONICS: BACKBONE OF THE MACHINE

  • Common electronic architecture across all Cat machines to ensure technician familiarity
  • Cat Electronic Technician (Cat ET) enables fast and easy troubleshooting
  • Serves as common platform for integrating future autonomy solutions
  • Product Link™ Elite provides real-time performance tracking

MATCHED POWERTRAIN

  • Variable air volume for reduced fuel consumption and powerful performance
  • C32B engine matched to largest “standard” compressor in this class for fast cycle times
  • Powertrain optimized to withstand rigorous drilling applications
  • High- and low-pressure configurations offer variable volume air control
  • Optimal feed force, rotary torque and air, helping to reduce fuel consumption

TECHNOLOGY AND AUTOMATION

  • Integrated Drill Assist functionality, including auto level, auto retract jacks, auto raise and lower mast, and auto drill
  • Machine health and performance monitoring keep machine running productively
  • Drill depth meter helps reduce over- and under-drilling
  • Ready to connect with the Cat MineStar™ suite of technologies, including Terrain for drilling and Command for drilling

SAFETY

  • Three standard cameras and large windows give the operator excellent visibility
  • MineStar Command for drilling enables remote or autonomous operation — removing operator from the machine
  • Seven engine shut-down buttons
  • Slip-resistant surfaces for safer ingress/egress and service
  • LED interior lights and backlit joysticks and keypads; exterior spot and flood lights illuminate paths for ingress/egress

SUSTAINABILITY

  • Designed to use less fuel, which reduces engine emissions
  • Tier 4 Final engines reduce NOx and particulate matter
  • Reduced waste and lower owning and operating costs thanks to increased commonality of systems and components, plus a reduction in unique part numbers
  • Longer maintenance intervals that decrease the amount of waste contributed to the environment


Optional Equipment

  • FRAME
    • Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (option) required for autonomy packages
  • MAST
    • Overhead winch with remote; variable speed drive with ≥ 1814 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
    • Rotary tool lubrication, 113.5 L (30 gal) oil injection system
    • Mast access ladder, mast grating and lanyard posts
  • OPERATOR ENVIRONMENT
    • Trainer seat that folds away
    • Window shades
    • Cabin pressure manometer gauge
    • Cab roof access ladder
  • SERVICE TOOL OPTIONS
    • Bushing Retention Tool 178 to 235 mm (7 to 9.250 in) pipe diameter
    • Lifting bails (available on request; required for commissioning)
      – 114 mm (4.5 in) API reg thread
      – 140 mm (5.5 in) API reg thread
      – 168 mm (6.625 in) for top sub/shock sub API reg thread
      – 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread
      – 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread
  • TECHNOLOGY PRODUCTS
    • Product Link Elite – cellular
    • Product Link Elite – Dual (cellular and satellite)
    • Terrain for Drilling
  • GROUND ENGAGING TOOLS
    • Drill bits, rotary tricone
      – 228 mm (9.0 in), OPT 1, (S3)
      – 228 mm (9.0 in), OPT 2, (M2)
      – 228 mm (9.0 in), OPT 3, (H1)
      – 251 mm (9.875 in), OPT 1, (M1)
      – 251 mm (9.875 in), OPT 2, (M3)
      – 251 mm (9.875 in), OPT 3, (H1)
      – 270 mm (10.625 in), OPT 1, (S3)
      – 270 mm (10.625 in), OPT 2, (M3)
      – 270 mm (10.625 in), OPT 3, (H1)
      – 311 mm (12.25 in), OPT 1, (M1)
      – 311 mm (12.25 in), OPT 2, (M3)
      – 311 mm (12.25 in), OPT 3, (H1)
  • DUST SUPPRESSION
    • Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
    • Tram off spray system
  • DRILL PIPE
    • 12.19 m (40 ft) Pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of four
      – DTH – 178 mm (7 in)
      – Rotary/DTH – 194 mm (7.625 in)
      – Rotary – 203 mm (8 in)
      – Rotary – 219 mm (8.625 in)
    • 7.62 m (25 ft) Pipes, 17.5 m (57.4 ft) Mast – Carousel holds quantity of four
      – DTH – 178 mm (7 in)
      – Rotary/DTH – 194 mm (7.625 in)
      – Rotary – 203 mm (8 in)
      – Rotary – 219 mm (8.625 in)
      – Rotary – 235 mm (9.25 in) Carousel accepts quantity of two
    • 9.14 m (30 ft) pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of two with special sub adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
      – Accepts 194 mm (7.625 in) pipe
    • Contact factory for additional pipe diameters